We spend the 80% of our time in closed places, and we barely mind about the quality of the air we breathe. Nowadays, more and more often, the residential environments such as houses and schools have mould and microorganisms which inevitably compromises the quality of the air we breathe. These, indeed, can cause infections, allergic reaction, asthma, or in some cases be toxic.
Usually bathrooms and kitchen are the most are the most affected; also the bedrooms, fresh and exposed at north can be affected by mould.
The causes are as follows:
- rising humidity in rooms at the ground floor or basements;
- infiltrations of water from the terraces, roofs, balconies or pipes caused by cracks and small damages;
- wet laundry dried inside;
- too much isolation of the rooms.
When mould appears, a prompt sanitizing treatment is necessary.
Camp® Surface Care has formulated a complete anti-mould line, for restoring the surfaces affected by mould. The anti-mould line starts from has not only products which removed the superficial stains but also products for the complete renovation and protection of the support before painting.
HOW TO REMOVE STAINS OF MOULD
For whitening walls with blackening and stains of mould, we suggest to use Rimuovi Muffa by CAMP® Surface Care, an instant action sanitizing cleaner. The product is ready to use and, thanks to its practical bottle with nebulizer, is easy to use and it can be applied directly on the interested parts or distributed on the entire surface.
HOW TO CLEAN UP THE SURFACES AFFECTED BY MOULD
After removing stains of mould from walls, we suggest to do a purifying and protective treatment with Muffa Control Risanante. It is an innovative bactericide and fungicide sanitizing which protects walls and prevents the reappearance of mould. The product penetrates in depth and it completely removes the infestations. It has an efficient and long lasting precautionary action against mould, algae, musk ad lichen.
HOW TO CONSOLIDATE AND PROTECT THE SURFACES BEFORE PAINTING
After applying the combined anti-mould treatment, before proceeding with paintings, it is suggested to prepare the acrylic fixative FixAcryl Antimuffa by Camp® Surface Care. The product, not only consolidates the surface, but it also improves the adhesion of the painting which will be applied later, containing special additives which protects the surfaces from mould and it ensures the hygiene of the support.
Depending on the absorbency of the support, FixAcryl Antimuffa can be diluted adding from 4 to 10 lt of water per lt of product and blend it carefully. The product can be applied by brush, roll or by spray.
At least, in order to complete the treatment and to strengthen the precautionary anti-mould action, especially in the in dampest places, we suggest to use Muffa Control Additive, adding it to the water paintings.