Mold is not only an aesthetic problem, but can also compromise air quality and room healthiness. Excess moisture, capillary rise phenomena and water infiltration, even more so if accompanied by poor ventilation and inadequate thermal insulation, are the main causes of its occurrence.

If you notice dark stains on walls, ceilings, joints or other damp corners, it is important to act immediately with the right products to remove mold permanently and prevent it from reforming.

In this guide you'll discover the most effective way to eliminate mold and prevent it with our two-step short cycle, with specific products for lasting results.

Step 1: Eliminate mold stains with Mold Remover

The first step is to remove visible mold. Mold Remover is a ready-to-use sanitizer that acts instantly on mold, mosses and lichens, removing all traces of them.

Before treatment, it is essential not to scrape or brush off mold that is already present, so as not to allow spores to spread in the environment and mold to proliferate on other surfaces.

Come utilizzarlo:

1. Spray Remove Mold directly on the affected surface.

2. Let it act for a few minutes to allow the product to penetrate deeply.

3. Rinse the treated surface thoroughly using a sponge or rag soaked in water, then wipe over with a damp cloth.

The product is extremely effective and, therefore, it is important not to use larger quantities than necessary.

Dove applicarlo:

Can be used on walls, ceilings, joints, floor joints and many other indoor and outdoor surfaces. Suitable for bathrooms, showers, basements, garages, laundry rooms, kitchens and general wet rooms.

Vantaggi:

• Quickly removes mold, moss and lichen.
• Recovers surfaces in minutes.
• It is effective and easy to use.

Step 2: Prevent reappearance with Mold Control Restore

Once the mold has been removed, it is critical to protect the treated masonry to prevent the problem from reoccurring. Mold Control Resanante is a treatment that penetrates deeply into masonry, inactivating present infestations and preventing the proliferation of mold and other microorganisms.

Come utilizzarlo:

1. Make sure the surface treated with Mold Remover is completely dry.
2. Apply Mold Remover Control with a roller or brush evenly.
3. Let it act for 48/72 hours: the product will penetrate deeply and form a barrier to protect the surface for a long time.
4. Remove residue by brushing the surface or washing it with water.

Dove applicarlo:

Suitable for walls, cement, concrete, joints, tile, stone and pre-existing paint, both indoors and outdoors.

Vantaggi

• Restores masonry
• Inactivates existing molds and prevents their reappearance
• Acts deeply against mold and microorganisms.

• Provides effective and long-lasting protection.

Tackling mold promptly and with the right products is the key to healthy and protected environments. With Camp's Short Cycle Remove Mold + Mold Control Remediant , you can eliminate the problem in minutes and effectively prevent its reappearance.

Do you want to say goodbye to mold once and for all?
Visit our website and follow our tutorials for perfect application!