Against mold you have an ally: CAMP
Knowing how to remove mold from home surfaces is very important. The key is to take prompt action before it spreads and becomes an even bigger problem.
Mold, in fact, can rot surfaces and cause health problems such as allergies, respiratory irritation and fatigue.
In this article we will teach you how to use our anti-mold products and give you some small tips to defeat the enemy. One example? When you shower or cook, open the window or run the fan. This way you will avoid condensation dampness, which is the most common cause of the formation of mold.
Some advice
The most effective way to eliminate mold is to eliminate its causes. So find out where the moisture is coming from and improve the ventilation of your rooms.
Then, make sure that your gutters and downspouts are not clogged, that water drains properly, and that there is no seepage.
What about inside the house? Avoid drying laundry inside, air rooms often, watch out for possible plumbing leaks, and install exhaust fans in the bathrooms, kitchen, and laundry room. An electric dehumidifier may also be useful to reduce the overall humidity level in your home.
Adesso proteggiti
Before doing any work, wear a face mask, preferably FFP2, so as not to inhale microscopic spores, preferably long rubber gloves to protect your hands, and goggles to prevent spores from coming into contact with your eyes.
Passiamo alla rimozione
You can take direct action on the mold with two Camp products: the Remove Mold and the Mold Control Remediator. The goal is to remove mold stains from walls and prevent their reappearance.
The first thing to do is to spray Mold Remover on the affected surface, let it work for a few minutes and remove any mold residue and blackening with a damp cloth.
Then, when the surface is dry, you can apply Mold Remover Control (with a roller or brush) evenly to prevent the reappearance of the phenomenon.
The treatment before painting
Before painting the walls of your home, you can take action with an anti-mold cycle by applying Mold Control Resanante directly to the wall.
After 48 hours, you will need to clean and sand the treated surface to remove stains and blackening.
Before painting, apply the fixative Fixacryl Antimold which consolidates surfaces and improves paint anchorage.
Then add the Muffa Control Additive to the water paint to enhance the preventive action and proceed with painting.
One last effort and you are done
Almost there. Now reapply Mold Control Remediant over the entire surface to prevent condensation mold growth. This step is especially recommended in particularly humid environments.
Now that you know the enemy and how to defeat it, we are waiting for you on our website with all Camp products.
